High heat resistance
High resistance to chemical
High mechanical strength
Small fluid resistance
Weather resistance
Low dissolution rate
East construction and cost-saving
In addition to holding the same features as PVC SCH80, the chlorination degree of CPVC resin is higher. Additional chlorine can increase temperature resistance up to 100 degree Celsius. CPVC SCH 80 offers high density, abrasive resistance, lower combustion, and lower smoke. Besides, it can also limit flame diffusion and possess better higher temperature resistance.
Fields of Applications | Applicable industries |
Acid and alkali transportation system Seawater and pure water transportation system Portable water transportation system Seawater irrigation system Wastewater transportation system Sprinkler irrigation system Environmental engineering constructions system Air conditioning system Saltwater drainage system Plating system in steel plant Hot and cold water transportation system Pulp transportation system |
Electronic industry/ Semiconductor industry/ TFT-LCD industry/ Panel industry Electroplating plant/ Copper Foil Plant/ Steel plant/ Chemical industry plant Paper mill/ Power plant Aquarium/ Swimming pool/ Hot spring hotel Medical and Pharmaceutical industry/ Food and Beverage processing industry |
Size Range:1/4" ~ 24"
Standard:ANSI
Suppliers:SPEARS、GF HARVEL、NAN YA
PVC SCH80 / CPVC SCH80 Specifications
|
|||||||||
Size | Outside Diam. | Average Inside Diam. | Min. Wall | Pressure Rating at 73.4°F | |||||
mm | inch | mm | inch | mm | inch | psi | kgf/cm2 | ||
6mm | 1/4" | 13.72 | 0.540 | 7.16 | 0.282 | 3.02 | 0.119 | 1130 | 80.14 |
10mm | 3/8" | 17.15 | 0.675 | 10.24 | 0.403 | 3.20 | 0.126 | 920 | 65.25 |
15mm | 1/2" | 21.34 | 0.840 | 13.36 | 0.526 | 3.73 | 0.147 | 850 | 60.28 |
20mm | 3/4" | 26.67 | 1.050 | 18.34 | 0.722 | 3.91 | 0.154 | 690 | 48.94 |
25mm | 1" | 33.40 | 1.315 | 23.77 | 0.936 | 4.55 | 0.179 | 630 | 44.68 |
30mm | 1-1/4" | 42.16 | 1.660 | 31.88 | 1.255 | 4.85 | 0.191 | 520 | 36.88 |
40mm | 1-1/2" | 48.26 | 1.900 | 37.49 | 1.476 | 5.08 | 0.200 | 470 | 33.33 |
50mm | 2" | 60.33 | 2.375 | 48.59 | 1.913 | 5.54 | 0.218 | 400 | 28.37 |
65mm | 2-1/2" | 73.03 | 2.875 | 58.17 | 2.290 | 7.01 | 0.276 | 420 | 29.79 |
75mm | 3" | 88.90 | 3.500 | 72.75 | 2.864 | 7.62 | 0.300 | 370 | 26.24 |
100mm | 4" | 114.30 | 4.500 | 96.16 | 3.786 | 8.56 | 0.337 | 320 | 22.70 |
125mm | 5" | 141.30 | 5.563 | 121.11 | 4.768 | 9.53 | 0.375 | 290 | 20.42 |
150mm | 6" | 168.28 | 6.625 | 145.01 | 5.709 | 10.97 | 0.432 | 280 | 19.86 |
200mm | 8" | 219.08 | 8.625 | 192.15 | 7.565 | 12.70 | 0.500 | 250 | 17.73 |
250mm | 10" | 273.05 | 10.750 | 241.12 | 9.493 | 15.06 | 0.593 | 230 | 16.31 |
300mm | 12" | 323.85 | 12.750 | 286.87 | 11.294 | 17.45 | 0.687 | 230 | 16.31 |
350mm | 14" | 355.60 | 14.000 | 315.21 | 12.410 | 19.05 | 0.750 | 220 | 15.60 |
400mm | 16" | 406.40 | 16.000 | 361.01 | 14.213 | 21.41 | 0.843 | 220 | 15.60 |
450mm | 18" | 457.20 | 18.000 | 406.76 | 16.014 | 23.80 | 0.937 | 220 | 15.60 |
500mm | 20" | 508.00 | 20.000 | 452.48 | 17.814 | 26.19 | 1.031 | 220 | 15.60 |
600mm | 24" | 609.60 | 24.000 | 544.02 | 21.418 | 30.94 | 1.218 | 210 | 14.89 |
Remark
1. Also available in offering PVC SCH40/CPVC SCH40 piping and fittings, please feel free to contact us.
2. The pressure resistance of Solvent Cemented Joint fittings and Spears SR (Stainless Steel Reinforced) fittings is approx. 60% of the pipe; the pressure resistance of standard thread fittings is 50% of the pipe.
Warning
1. PVC SCH80/CPVC SCH80 is not allowed in transferring the compressure air or gas.
2. Do not use compressed air or gas in testing any PVC or CPVC thermal plastics piping system; Do not apply the equipment that activated by air or gas to clean-up the system. The above actions will probably cause the burst of the piping system and even cause serious harm to humankind.
Temperature Pressure De-rating for PVC & CPVC Thermoplastic Materials |
||||||||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||||||||
Remark For the threaded piping system, PVC will not exceed 110°F(43°C);CPVC will not exceed 151°F(66°C)。 |
Typical Physical Properties of PVC & CPVC Thermoplastic Materials | |||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||
Above technical data is retrieved from Spears Manufacturing Company |